Revit Guides
Data Management
ELI5
Electric Vehicle Charging Points
Active vs Passive Electric Charging Points Explained Active Charging Points Active charging points are fully wired and connected, ready-to-use charging points at parking spaces – an actual socket connected to
Exchange Information Requirements (EIR)
The Exchange Information Requirements (EIR) term introduced by BS EN 19650 replaces the PAS 1192 term Employer Information Requirements (EIR) on all projects where BS EN ISO 19650 compliance is
Emergency Lighting in Toilet Cubicles
In any office building, ensuring the safety and well-being of employees and visitors is of paramount importance. Emergency lighting plays a vital role in providing illumination during power outages or
energy let-through of a device (I2t)
I2t The energy let-through of a device in A2s. The total amount of energy let through by a protective device for a given level of fault current at a stated
Employer
Appointing party ISO 19650 term depends on where in the hierarchy the employer is located.The BS EN ISO 19650‑2 appointing party (A) is the equivalent of the PAS 1192‑2:2013 top‑level
Employer’s Information Requirements (EIR)
The PAS 1192 term Employer Information Requirements (EIR) has been replaced by Exchange Information Requirements (EIR) on projects where ISO 19650 standards are applicable. Employer’s information requirements (EIR) also use
expert
person who, through knowledge or experience, has competence to give an opinion in the fields about which he/she is consulted[SOURCE: ISO 13302:2003, 3.10, modified — The domain “” has been
enumerated type value
data type consisting of a set of named values called elements, members, enumeral, or enumerators ofthe type
EXPRESS specification
formal specification is provided in the EXPRESS language. BS EN ISO 23387:2020
exchange requirement (ER)
defined set of information units that needs to be exchanged to support a particular business requirementat a particular process phase (or phases)/stage (or stages) BS EN ISO 29481-1:2017
Enabling Tools
Tools that help design, develop, deliver, and maintain the built asset. You may require a number of different enabling tools for specific tasks and functions. https://www.thenbs.com/knowledge//periodic-table-of-bim
engineer
a person who designs and superintends the carrying out of civil engineering works, structures of buildings, installation of services, or who maintains such civil engineering works, structures or services https://www.iso.org/obp/ui#iso:std:iso:6707:-2:ed-3:v1:en:term:3.8.25
Leadership in Energy and Environmental Design
An internationally recognized green building certification system confirms the level of the sustainability performance of an asset. Â Confirming the level at which the asset was designed and built using strategies
Emergency Voice Communication System (EVCS)
An Emergency Voice Communication System (EVCS) or (EVC) is a fixed, monitored and maintained, bidirectional, full duplex voice communication system (Refuge system) designed to facilitate the orderly evacuation of disabled
efficiency
correlation between the outcome and the resources used a measure of the utilization of resources to realize a given objective Note 1 to entry: An activity is efficient if it minimizes
Built Environment
All forms of buildings (residential, industrial, commercial, hospitals, schools), all economic infrastructure (above and below ground) and the urban space and landscape between and around buildings and infrastructure3, as well
Ecocide
In environmental justice, ecocide is the criminalised activity of substantially harming or destroying ecosystems in their entirety or by harming individual species. At time of writing, 10 countries have criminalised
Equipment Clearance
Equipment Clearance shall be modelled for use in interference management and maintenance access requirements. It is the minimum space adjacent to the equipment required to allow access for maintenance, installation
Furniture, Fixtures, Equipment (FFE)
Furniture, Fixtures, Equipment (FFE) a systems furniture layout within an asset
Existing Conditions Modeling
A process of developing a 3D model of the existing conditions for an asset, or a specific area within a facility.The model can be developed based on laser scanning surveys
End Event
An end event denotes the point at which a process’s path will come to an end. End events can only result in a “throw” of a result.[1] Symbol 1] Silver,
End Event (Message)
At the end of the process, this type of end indicates that a message is sent to a participant.[1] Symbol N Method and Style: A levels-based methodology for BPM process
